Abbott Laboratories Inc. landed U.S. FDA clearance for its Freestyle Libre 3 integrated continuous glucose monitoring system (CGM)’s reader device a bit earlier than expected. With the regulatory greenlight for the durable medical equipment component received, the company is now pursuing coverage by the CMS for the entire Freestyle Libre 3 system. The system’s sensor received FDA clearance in May 2022.
Seemingly in response to the release of a proposed rule for ethylene oxide emissions by the U.S. Environmental Protection Agency, the U.S. FDA has released a second pilot program for device master files for sterilization of medical devices. This program is for single-use PMA devices only made by nine companies and allows the manufacturer or sterilizer to document the switch to radiation sterilization with an expedited review process.
Developers of clinical decision support (CDS) software have their hands full with a recent U.S. FDA final guidance on these products, but the picture promises to become more byzantine with the publication of a draft rule by the Office of the National Coordinator (ONC). The new ONC proposal would require a demonstration of transparency for decision support intervention (DSI) predictive functions in order for that software to qualify for ONC certification, a requirement that might not overlap neatly with the FDA’s own transparency requirements.
The U.S. FDA has granted de novo authorization to Moximed Inc. for its Misha knee system, a first-of-its-kind implantable shock absorber for people suffering from osteoarthritis (OA) of the knee. The device is intended to relieve pain and improve daily function in patients ineligible for, or not ready to undergo, joint replacement.
The U.S. Environmental Protection Agency (EPA) has proposed a new set of requirements for control of emissions of ethylene oxide (EtO), a standard the agency claims will “slash” emissions by 80% per year. The problem for med-tech trade associations is that EPA expects that the abatements be implemented within 18 months, a pace that industry says is too aggressive and could lead to shortages of critical devices and products used in surgeries and other procedures.
Getinge AB received U.S. FDA premarket approval (PMA) for its Icast covered stent system, which has been used by clinicians for 20 years under the brand name Advanta V12. Icast is designed to treat patients with iliac arterial occlusive disease, a type of peripheral arterial disease where atherosclerosis narrows and blocks peripheral arteries.
The U.S. CMS has a few changes in mind for the new technology add-on program (NTAP) for fiscal year 2024, including a proposal to allow manufacturers to apply for an NTAP payment only after the sponsor has filed a completed premarket application with the FDA. Perhaps more significantly, the deadline for FDA approval would also be moved up earlier in the calendar year, from July 1 to May 1, a change that could eliminate a year of NTAP eligibility for a significant number of products.
In December 2013, the U.S. FDA held an advisory hearing on spinal spheres used in intervertebral fusion procedures, a hearing that generated a recommendation that the agency classify these devices as class III devices. The agency finally followed through on that recommendation with a final rule that requires a PMA filing for these devices, concluding a process that took much longer than the typical rulemaking.
The International Medical Device Regulators Forum (IMDRF) has posted a guidance that spells out the use of a common document for regulatory review for member regulatory authorities, a mechanism that might ease the lives of manufacturers across the globe.
Hundreds of executives from biopharma companies are signing onto an April 10 letter decrying a U.S. district judge’s decision last week to stay the FDA approval of mifepristone, which is used in more than half of all abortions in the U.S.
